Inverter Heat Pumps for 60 m3 pools you will save electricity consumption and keep the water in your pool hot.
The Gre heat pump with inverter technology is capable of automatically adjusting the heating capacity according to the heat demand. Great efficiency that allows to reach an optimal COP (performance coefficient).
The heat pump is an efficient and economical heating system that allows heating the water in the pool. The system uses the outside air, transforms it into energy that is returned as heat. For proper operation, this range of heat pumps needs to be connected to a by-pass kit so that the water circulates bypass to the heat pump.
As for all types of heating, heat pumps are installed after the filtration system. The range of GRE heat pumps is made up of 4 references, each of which includes a cover for protection during the winter.
- Minimum electrical consumption.
- Savings in electricity consumption compared to a standard heat pump.
- Less noise.
- The Inverter heat pump works with a significantly lower decibel level than a standard heat pump.
- Great durability.
- Titanium heat exchanger and high strength casing.
- Operating temperature from 7°C.
- Automatic defrost.
Data Sheet
| Model |
HPGI60 |
|
| * Air capacity 28℃ / water 28℃, Humidity 80% |
|
|
| Heating power |
Kw |
12-2,9 |
| Power consumption |
Kw |
1,77-0,18 |
| COP |
|
16-6,8 |
| * Air capacity 15℃ / water 26℃, Humidity 70% |
|
|
| Heating power |
Kw |
8,5-2 |
| Power consumption |
Kw |
1,72-0,28 |
| COP |
|
7,2-4,9 |
| General characteristics |
|
|
| Compressor |
|
Inverter |
| Voltage |
V |
220~240V / 50Hz / mono |
| Maximum pool volume ** |
m³ |
< 60 |
| Recommended water flow |
m³/h |
3,7 |
| Water pressure drop |
KPa |
14 |
| Heat exchanger |
|
Twist-Titanium tube in PVC |
| Water inlet-outlet connection |
mm |
50 |
| Vent Type |
|
Horizontal |
| Degree of protection |
|
IPX4 |
| Maximum pressure suction and discharge side |
MPa |
4,2 |
| Noise level (at 10 meters) |
dB(A) |
23-35 |
| Noise level (at 1 meter) |
dB(A) |
40-52 |
| Refrigerant |
|
R32 |
| Amount of refrigerant |
g |
550 |
| CO2 equivalent |
Tm |
0,37 |
| Net weight |
Kg |
68 |
| Gross weight |
Kg |
73 |
| Dimensions |
mm |
987 x 400,5 x 688 |
| Packaging dimensions |
mm |
1015 x 435 x 713 |
** Ambient temperature of 15ºC, water temperature of 26ºC and humidity of 70%
