Battery-powered robotic pool cleaner Gre Wet Runner is the best tool to help you clean your pool.
The electric pool cleaners from the GRE and Zodiac range allow you to clean the pool in a comfortable, automatic and efficient way. Our range of robots adapts to all types of pools and can clean both the bottom and the walls and the waterline (depending on the model). Equipped with innovative systems, GRE's electric pool cleaners will collect large debris such as leaves to finer particles such as sand. The pool robot is the best tool to help you clean your pool.
Product characteristics:
- Wet Runner Cordless Electric Pool Cleaner
- Cleans the flat bottom of swimming pools
- Suitable for above ground pools up to 7x5 m
- Autonomy: 60 min
- Power: 26.6W
- Suction power: 3.6 m3/h
- Drag speed: 16m/min
- Charging time: 4-5 hours
- Battery: Lithium - 4000 mAh
- Tank capacity: 4L
- Simple set up: just place the robot in the water and it is ready to start cleaning
- Very manageable thanks to its lightness
Recommendations for use:
- Use only the original charger
- Take special care with sharp objects that may be under water, the filter grid of the robotic pool cleaner can be easily damaged
- Do not use lubricating oil, it pollutes the water
- The circulation of the water can affect the movement of the robot, so it is recommended to deactivate the filtration of the pool during the use of this pool cleaner.
- There may be obstacles in the pool that affect the movement of the robot, such as stairs.
- Avoid sun exposure, store it in a clean and dry place
- It is important to keep the sensor clean to avoid limescale or dirt build-up. We recommend that you watch the following video for optimal cleaning of the sensor.
Possible problems and solutions:
- The robot does not catch the waste: POSSIBLE CAUSES: It has no battery - the compartment is full - the impeller is clogged or damaged
- The robot does not cover the entire pool or does not move: POSSIBLE CAUSES: The compartment is full
- The head rotates but the robot does not move: POSSIBLE CAUSES: there is an obstacle at the bottom - the bottom is not completely flat
- When plugged in, the robot does not work: POSSIBLE CAUSES: There is dirt or rust around the sensor. Clean the sensor with a piece of paper, a cloth or a brush. (Watch video)
- *Stop the use of the device if it is detected that something is not working correctly and contact us through our website.
