The reinforcement stitched around the thermal blanket makes it possible to hook the reel and avoid friction and wear when rubbing the thermal blanket with the pool wall.

The reinforcement or side trim is very useful when you are going to use the furler with the thermal blanket because it allows the furler to hook much better the thermal blanket and also prevents it from tearing when pulling it.

The side edge of the thermal blanket also prevents the blanket rubbing with the coronation stone of the pool when we wind the solar blanket, if we do not put the lateral reinforcement is the thermal blanket itself that rubs with the stone and little by little leaves wearing but if it is the side edging that rubs the stone, being this harder scarcely suffers damage and if it becomes worn can be changed, which is cheaper than changing the full thermal blanket.

Possible placements of the lateral reinforcement:

1. Only in the bottom where the winder is hooked: Improves the hooking of the winder with the thermal blanket.
2. In the bottom where the winder is hooked and the two sides: Improves the hooking of the furler with the thermal blanket and avoids friction on the sides.
3. Throughout the perimeter: Improves the hooking of the reel with the thermal blanket and prevents friction on the sides and is more aesthetic.

Advantages of lateral reinforcement

• Protect your thermal blanket of any type
• It facilitates the collection.

Characteristics of the lateral reinforcement:

• Material: 1100dtex polyester fabric
• Weight: 600 g / m2
• Color blue

This product is sold only together with any type of thermal blanket, in case you need only the lateral reinforcement, consult us.