• PH 600 (PH ECO): 0.0 to 14.0 pH
• Manual Calibration 1 point
• CD 611 to 0.0 to 20.0mS/cm -
• Manual Calibration

The PH MW100 meter is portable with a large, ergonomic display and provides fast and efficient measurement.

The range of the PH MW100 meter is from 0.0 to 14.0 pH; 0.1 pH precision, it has manual calibration at 2 points, it has an ergonomic wide screen with a safety strap; The meter electronics are modern, fast and efficient.

The PH MW100 meter is easy to use, it turns on with the On button, you wait for the data to stabilize before taking the data by the way, after the measurement, turn it off and replace the cap on the electrode with a few drops of liquid Storage inside, is a quality meter that will give us fast and safe measurements in a few seconds, it is advisable to calibrate the meter at least once a month or after a long season without using it.

It is the ideal companion for sectors such as agriculture, hydroponics, aquariums, fish farming, education, laboratories, enjoy its benefits.

Features

• PH meter.
• Measurement scale 0.0 to 14.0.
• It works with a 9V battery.
• Replaceable probe.
• Calibration to 2 points PH 4.01 and PH 7.01.

The EC MW302 portable meter is suitable for field measurement and ideal for applications related to agriculture and education.

The EC MW302 portable meter is a conductivity and TDS meter with automatic temperature compensation, the conductivity of the soil is checked before applying the fertilizers to determine the needs of the soil and after fertilization to measure its effectiveness, they have been designed to fit the needs of farmers and are very suitable for hydroponic crops such as tamtíen in aquariums, fish farming, water treatment, laboratories, education.

It is easy to use, press the ON button, before measuring wait a few seconds for the sensor to capture the ambient temperature, after use the meter turns off, clean and dry the lance sensor, to clean it you can use it alcohol.

Data Sheet

The PH MW101 portable meter features modern electronics for fast and efficient measurement and is manually calibrated.

The MW101 portable PH meter works with manual temperature compensation, it has a wide screen, ergonomic shape, safety strap as well as a 1 meter cable, BCN connector.

It is easy to measure, simply place the probe on the sample, shake gently, and wait for the reading to stabilize.

The MW101 portable Ph meter is ideal for field measurements, it is very well suited to sectors such as agriculture, hydroponics, aquariums, fish farming, education, laboratories, swimming pools.

Features

• It offers fast results with a pH accuracy of + - 0.02 with two-point calibration.
• It is resistant to receive blows.
• Results can be read with a large digital LED readout.
• Accuracy of + - 0.02 pH with a pH range of 0.00-14.00.
• Light and portable.
• Easy measurement
• Manual calibration.
• Automatic shutdown and low power demand for approx. 300 hours of continuous use.
• Detection bulb.
• Reference Board.
• Storage.

The MW100T Soil Ph Meter is ideal for growers and those who want to 100% monitor PH status and have better results.

It is a portable instrument that includes a probe to measure the pH of the earth, it is small and fast, precise and easy to use, it has a small digital screen where the measurements are displayed.

It is easy to use, the probe is connected by its plug to the meter, it removes the protection from the probe, if the probe is dry, immerse it for a few minutes in the supplied fluid. Calibrate the meter before use, it is calibrated by two points, using the calibration fluids PH 7.01 and PH 4.0, immersed until the data stabilizes.

Features

• Measurement range between 0.0 and 14.0 mS and resolution of 0.1 mS.
• Crystal probe.
• 1m cable with BNC connector.
• Portable.
• Replacement probe.

Data Sheet

Continuous pH meter with alarm. The alarm goes off when it exceeds the previously reported data.

• ALARM goes active when the measurement of the data reported.
• PH: 0.0 to 14.0 pH - Resolution: 0.1 pH
• Calibration Manual 2 points (pH 4 and pH 7)
• With 12VDC adapter -
• Probe incluiía (MA911B / 2) with 2m Cable
• Wall mounting with 2 screws or velcro

• Application: To measure seawater (marine aquarium)
• Range: 0-50 PSU - 0 to 150 ppt - 1.000 to 1.114 SG (20/20)
• Resolution: 1 Psu / 1 ppt / 0.001 SG / 0.1 ° C
• Digital calibration with a drop of distilled water (key pres. "Zero)"
• Automatic Temperature Compensation
• Battery: 1 x 9V Alkaline (5000 h of operation)
• Auto close after 3 mn unused

The ORP/Temp ORP57 meter is a method that measures the quality of water it informs us about the oxidation and reduction potential of water.

The ORP / Temp ORP57 meter measures the quality of water in aquariums, that is, in fresh water from 250m V they are considered good values, the values ​​of sea water range from 350 to 400 mV, in swimming pools the value necessary to eliminate certain bacteria is 700 mV, in wastewater the measurement is mainly used in the detoxification of wastewater, with the reduction of chromate or the oxidation of cyanide.

It is easy to use, it is turned on with the ON button, once it is ready to measure, to freeze the data press and hold the SET / HOLD button, then to turn off the meter press OFF.

With the ORP / Temp ORP57 meter you will have precision when measuring water quality.

Features

• Measure the quality of the water.
• It informs about the oxidation and reduction potential of water.
• With extended range of pH -2.00 to 16.00 or ± 1000 mV.
• Simultaneously it indicates the temperature from - 5.0 ºC to 105.0 ºC or from 23.0 ºF to 221.0 ºF.
• Automatically calibrates at 1 or 2 points with standard buffers and memorized NIST buffers.

The MC122 is a meter for PH levels in water and will also monitor various related pHs from oxygen pumps to CO2 regulators.

The MC122 is also ideal for correcting the pH of your nutrient tank from your natural or hydroponic cultivation, it has a scale from 0.0 to 14.4 ph, with manual calibration, its external equipment control block has a roulette wheel to fix the data. setpoint from 0.5 to 9.5 ph, while the external equipment is activated, a visual alarm (red led) will also be activated.

With the MC122 meter your aquarium will have the individual attention it needs, it is ideal for a fish tank, swimming pool, aquarium, a hydroponic culture and it is even suitable for use in a laboratory.

Features

• Set point adjustment roulette.
• 2-point manual calibration.
• LED visual alarm.
• 12 VDC adapter and wall fixing kit.
• Coupling todma for an external equipment (Solenoid valve)
• Double junction pH electro and / or platinum ORP electrode (BNC connector).
   

Installation and measurement

• Connect the 12VDC transformer to the current
• Connect the dock to the power (black and white socket)
• Connect the PH electrode to the meter base
• Remove the probe protection before any measurement.
• Make sure the meter was calibrated before use.
• Dip the pH electrode (2.5 cm) in the broth of the tank (let it float with the help of a wide polyexpan for example).
• Turn on the meter by pressing the ON / OFF button
• Choose the PH control mode (for PH> at set point: press “above” / For pH <at set point: press “below”)
• Allow the reading to stabilize and the meter will start continuous monitoring.
• A visual alarm indicates hen the measurement exceeds the set point.
• When the alarm is activated, the docking station is also activated, and from there the auxiliary equipment turns on.
• The set point can be selected by adjusting the center front knob to the desired value.
• Selection scaling ranges from 5.5 to 9.5pH
   

Calibration:

• Remove the protection from the electrode.
• Dip the electrode in a pH7.01 calibration liquid envelope and wait for the data to stabilize.
• With the help of a screwdriver, adjust the data to pH7.0
• Sets the PH4 / PH10 button to the PH4.0 data.
• The meter is calibrated and ready to measure.
• It is advisable to calibrate the meter at least once a month, or after a long unused season or after an electrode change.

Ficha técnica

The ORP MW500 portable meter is one of the most reliable meters due to its fast and simple operation as well as its precision.

The ORP MW500 portable meter will allow you to determine the electrical potential of a certain liquid that helps to assess the oxide-reduction process, this measurement is used to determine the quality of the water.

It is highly recommended for swimming pools.- The necessary value to eliminate certain bacteria is 700mV, also in aquariums, wastewater that is used above all in detoxification of wastewater, such as the reduction of chromate or the oxidation of cyanide.

It is a favorite for people looking to bookmark their test schedule when they have a constant need to maintain levels. Commonly used in aquariums, swimming pools and spas, and other uses of water monitoring, it can also be used to measure sulfur dioxide in wine using the manual Ripper titration method.

Features

• It offers accuracy with an accuracy of ± 5mV.
• It is resistant, it is designed to receive blows.
• Low maintenance comes with a low maintenance probe (gel filler) and able to withstand more challenging samples (double junction).
• Fast, easy-to-read, current results with a great digital LCD readout.
• 3 foot probe cable for added flexibility when testing.
• Automatic shutdown and low power demand for an extended battery life of 300 hours.
• Small, ergonomic and lightweight design.
• ± 1000mV range
• Resolution 1mV-